This Mikuni RS36 carburetor Kit will breathe a whole new lease of life into your Triumph Adventurer, Thunderbird sport, Tiger, Trident 900 and other simular triples with an up to 25% increase in power, whilst making it perform and operate as it should with no hesitations or flat spots.
You will very quickly realize that the expense of a rebuild of your old worn OEM carbs can far exceed the cost of these new units and unfortunately as with many rebuilds now days you only have the option in many cases of gambling with very poor quality aftermarket parts. Considering this and if intending to ride and enjoy your motorcycle for years to come, it makes good sense to retire your OEM carbs into the cupboard and step up to a set of RS’s, the improvement will be very impressive.
Before rushing in and ordering please firstly check your carb spacing and carbie sizes for compatibility.
This Mikuni kit comes with the following carb throat centre to centre spacing’s for direct fitment to Triumph triple models and with a total front to back measurement of 100mm will adapt to the stock air-box 58mm (for using PODs they can be supplied at 55mm), engine inlet rubbers (42mm) and throttle cables.
A= 88mm (spacing centre to centre between carb 1 & 2)
B= 88mm (spacing centre to centre between carb 2 & 3)
Pilot Jet: VM28/486-17.5, Needle: 9DZH1, Needle Jet: P-4 (568 Series), Main Jet: N100.604-120/130
A spare set of size 15 pilots are provided and may need fitting when using the stock air-box. Two spare sets of mains are also provided for WOT testing for confirming correct tune. Other than that bolt them on and hold on.
Be The First To Review This Product!
Help other Triumph Performance Parts users shop smarter by writing reviews for products you have purchased.